メインコンテンツにスキップ

Reemplazo de la pantalla del iMac Intel 21.5" EMC 2308

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての24個のガイドに反映されます。

英語
スペイン語

手順 3を翻訳中

手順3
iMac Intel 21.5" EMC 2308 Display Replacement: 手順 0、 3の画像 1 iMac Intel 21.5" EMC 2308 Display Replacement: 手順 0、 3の画像 2 iMac Intel 21.5" EMC 2308 Display Replacement: 手順 0、 3の画像 3
  • Pull the vertical sync ribbon cable out of its socket on the LED driver board near the top left corner of your iMac.

  • The vertical sync ribbon cable has a ZIF style end, but the socket has no lock or retaining flap. Simply pull the cable away from its socket toward the optical drive side of the iMac to disconnect it from the LED driver board.

Saca el cable plano de sincronización vertical de su zócalo en la placa del controlador LED cerca de la esquina superior izquierda de tu iMac.

El cable plano de sincronización vertical tiene un extremo de estilo ZIF, pero el zócalo no tiene bloqueo ni solapa de retención. Simplemente saca el cable de su zócalo hacia el lado de la unidad óptica del iMac para desconectarlo de la placa del controlador LED.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります