手順 20を翻訳中
手順20
Replace LED Bar Part 2
-
Loosen all screws and gently separate LED bar from the green heat transfer tape to avoid ripping it and keep it sticky to the tub.
-
Replace LED bar
-
If white plastic reflector bar breaks (very easily). Use tape on the backside to keep it stable during reassembly.
-
If white plastic reflector has broken T bars. Use hot glue to keep bar installed firmly against the tub during reassembly
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。