Cherry Gentix 4K Maus - Disassembly

手順1

Remove the "Q.C. Passed" Sticker to have access to the Phillips screw below.

手順2

Remove the three Phillips screws.

手順3

Lift the upper part of the mouse.

手順4

Loose the plug with the flat end of a spudger.

手順5

Lift the two side parts and put it aside.

手順6

Loose the plug with the flat end of a spudger.

手順7

There are two plasic clips. Loose the left plastic clip very carefully.

手順8

Move the mouse wheel a bit to the right.

手順9

Reference picture of the board.

手順10

Remove the four Phillips Screws.

手順11 — optional for cleaning

Have a look at the plastic clips

手順12

Insert the flat end of the spudger into the gap between the two halves on the left and right. The rear plastic clips should then release automatically.

手順13

Loose the plastic clips in the middle.

手順14

Insert the flat end of a spudger into the gap between the two parts.

手順15

Unlock the two plastic clips.

手順16

Overview of all parts.