手順 1を翻訳中
手順1
Apply the logic board cover adhesive
-
Use tweezers to remove the conductive tape adhesive from the top right corner of the motherboard cover.
-
Use the flat end of a spudger to scrape up any remaining bits of adhesive.
-
Use a pipette or syringe to apply a few drops of highly-concentrated isopropyl alcohol (over 90%) to the adhesive residue and wipe it away with a microfiber cloth.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。