Dell XPS 15 9575 I/O Board Replacement

英語

日本語

手順 3を翻訳中

手順3

Use the point of a spudger to push on alternating sides of the connector to "walk" it out of its socket and disconnect the speaker cable from the I/O board (also known as the daughterboard).
It may take a lot of alternating before the connector comes out. Be patient, and don't pull on the cables.
To reconnect the cable, align the connector and use a spudger or clean fingernail to push it fully into the socket.
Don't push on the cables themselves, or you may damage the connector.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。