手順 11を翻訳中
手順11
-
Fix the new battery onto the foam and place it in the center of the position, which is marked by a white line.
-
Carefully put everything back into position. Re-solder the power connector, if it had to be de-soldered before. Fix it back into the round hole.
-
Close the case with the clip 1. The black and silver case can be fixed best using some transparent tape around the case.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。