メインコンテンツにスキップ

Sony WH-1000XM4 マイクアレイの交換

英語
日本語

手順 6を翻訳中

手順6
Sony WH-1000XM4 Microphone Array Replacement: 手順 0、 1の画像 1
  • Flip the headphones over, ear cups facing down.

  • Use your fingers to lift up and flip over the left ear cup cover.

  • Don't try to completely remove the cover just yet—it's still attached with many cables.

  • Grip the touch ribbon cable and pull it straight out of its connector on the main board to remove it.

  • Remove the ear cup cover.

イヤーカップを下に向けて、ヘッドホンを裏返します。

指で右側のイヤーカップカバーを持ち上げ、裏返します。

まだカバーを完全に取り外そうとしないでください。ケーブルが繋がったままの状態です。

タッチリボンケーブルをつかみ、メインボード上のコネクターからまっすぐに引き抜いて取り外します。

イヤーカップカバーを取り外します。

[* black] Flip the headphones over, ear cups facing down.
-[* black] Use your fingers to lift up and flip over the right ear cup cover.
+[* black] Use your fingers to lift up and flip over the left ear cup cover.
[* icon_caution] Don't try to completely remove the cover just yet—it's still attached with many cables.
[* black] Grip the touch ribbon cable and pull it straight out of its connector on the main board to remove it.
[* black] Remove the ear cup cover.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります