メインコンテンツにスキップ

MacBook Air 15" 2023 Touch-ID-Sensor tauschen

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
ドイツ語

手順 1を翻訳中

手順1
MacBook Air 15" 2023 Touch ID Sensor Replacement, Remove the connector covers: 手順 0、 3の画像 1 MacBook Air 15" 2023 Touch ID Sensor Replacement, Remove the connector covers: 手順 0、 3の画像 2 MacBook Air 15" 2023 Touch ID Sensor Replacement, Remove the connector covers: 手順 0、 3の画像 3
Remove the connector covers
  • Use a 3IP Torx Plus screwdriver to remove the two 1.5 mm‑long screws securing the Touch ID sensor and headphone jack connector covers.

  • Remove the two covers.

Entferne die beiden 1,5 mm langen Torx T3 Schrauben, mit denen die Abdeckungen über den Steckern des Touch-ID-Sensors und des Kopfhöreranschlusses befestigt sind.

Entferne die zwei Abdeckungen.

[title] Remove the connector covers
-[* red] Use a T3 Torx screwdriver to remove the two 1.5 mm‑long screws securing the Touch ID sensor and headphone jack connector covers.
+[* red] Use a 3IP Torx Plus screwdriver to remove the two 1.5 mm‑long screws securing the Touch ID sensor and headphone jack connector covers.
[* black] Remove the two covers.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります