メインコンテンツにスキップ

iPad Pro 11インチ LiDARセンサーアセンブリの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 5を翻訳中

手順5
iPad Pro 11" LiDAR Sensor Assembly Replacement, Peel away the tape: 手順 0、 2の画像 1 iPad Pro 11" LiDAR Sensor Assembly Replacement, Peel away the tape: 手順 0、 2の画像 2
Peel away the tape
  • Peel off any tape covering the microphone.

  • Set the tape aside. You'll use it during reassembly.

マイクを覆っているテープがあれば剥がします。

テープを保管してください。再組立の際に、再利用します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります