メインコンテンツにスキップ

画面前提(LiDARアセンブリを取り外さない場合)

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
日本語

手順 2を翻訳中

手順2
Screen Prerequisite (No LiDAR Assembly Removal), Disconnect the remaining display cables: 手順 0、 3の画像 1 Screen Prerequisite (No LiDAR Assembly Removal), Disconnect the remaining display cables: 手順 0、 3の画像 2 Screen Prerequisite (No LiDAR Assembly Removal), Disconnect the remaining display cables: 手順 0、 3の画像 3
Disconnect the remaining display cables
  • Disconnect the two remaining display cables.

残りの2つのディスプレイケーブルを外します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります