メインコンテンツにスキップ

iPhone 14 Pro Scherm Vooraf vereiste handleiding

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
オランダ語

手順 17を翻訳中

手順17
iPhone 14 Pro Screen prereq, Disconnect the battery: 手順 0、 3の画像 1 iPhone 14 Pro Screen prereq, Disconnect the battery: 手順 0、 3の画像 2 iPhone 14 Pro Screen prereq, Disconnect the battery: 手順 0、 3の画像 3
Disconnect the battery
  • Use the pointed end of a spudger to disconnect the battery cable by prying the connector straight up from its socket.

  • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

  • Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

Gebruik de punt van je spudger om de batterijaansluiting in een rechte beweging uit het contact omhoog te duwen.

Voorkom dat je de zwarte siliconen zegel om deze en andere contacten op het bord beschadigt. Deze zegels zorgen voor extra water- en stofdichtheid.

Buig de kabel van het logic board weg om te voorkomen dat de batterij per ongeluk contact maakt en je telefoon inschakelt tijdens de reparatie.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります