メインコンテンツにスキップ

iPhone 14 Pro 스크린 사전 작업

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
韓国語

手順 14を翻訳中

手順14
iPhone 14 Pro Screen prereq, Open the iPhone: 手順 0、 3の画像 1 iPhone 14 Pro Screen prereq, Open the iPhone: 手順 0、 3の画像 2 iPhone 14 Pro Screen prereq, Open the iPhone: 手順 0、 3の画像 3
Open the iPhone
  • Remove your suction handle from the screen.

  • Rotate your iPhone so the right edge faces you.

  • Open your iPhone by swinging the screen up from the right side, like the front cover of a book.

  • Lean the screen against something to keep it propped up while you're working on the phone.

  • If you don't have anything at hand to lean the screen against, your suction handle can do the trick.

  • During reassembly, lay the screen in position, align the clips along the top edge, and carefully press the top edge into place before snapping the rest of the screen down. If it doesn't click easily into place, check the condition of the clips around the perimeter of the screen and make sure they aren't bent.

스크린에서 흡입 핸들을 분리하세요.

오른쪽 가장자리가 자신을 향하도록 iPhone을 돌리세요.

책의 앞 표지처럼 스크린 오른편을 위로 펼쳐서 iPhone을 열어주세요.

휴대폰에 작업하는 동안 디스플레이를 다른 물건에 기대어 세워 놓으세요.

스크린을 기대어 놓을 만한 물건이 없다면 흡입 손잡이를 이용하면 됩니다.

재조립할 때 스크린을 제자리에 놓고 상단 가장자리를 따라 클립을 정렬한 다음 상단 가장자리를 조심스럽게 눌러서 제자리에 고정하세요. 제대로 들어맞지 않으면 디스플레이 주변의 클립 상태를 점검하고 구부러지지 않았는지 확인해 주세요.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります