メインコンテンツにスキップ

Sostituzione CPU iMac Intel EMC 2546 27"

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
イタリア語

手順 6を翻訳中

手順6
iMac Intel 27" EMC 2546 CPU Replacement: 手順 0、 1の画像 1
  • Keeping inward pressure on both the heat sink and the backing plate, flip the logic board over so the heat sink faces down.

  • Make sure to keep pressure on the backing plate while you move the logic board. If the backing plate falls out then the heat sink can shift and damage the CPU pins.

Tenendo premuti insieme il dissipatore e la piastra di appoggio, gira la scheda madre in modo che il dissipatore sia rivolto verso il basso.

Assicurati di tenere premuta la piastra di appoggio mentre muovi la scheda madre. Se la piastra cade, il dissipatore si può spostare e danneggiare i pin della CPU.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります