メインコンテンツにスキップ

iMac Intel 27" EMC 2546 Vervanging van de CPU

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
オランダ語

手順 5を翻訳中

手順5
iMac Intel 27" EMC 2546 CPU Replacement, Install the heat sink: 手順 0、 2の画像 1 iMac Intel 27" EMC 2546 CPU Replacement, Install the heat sink: 手順 0、 2の画像 2
Install the heat sink
  • Align the holes on the CPU section of the heat sink with the pins on the backing plate.

  • Set the heat sink straight down on the CPU, GPU, and VRAM chips.

  • Do not move the heat sink around once it contacts the CPU. The thermal paste will adhere the CPU to the heat sink and moving it around can bend the CPU pins.

Breng de gaten in het CPU-deel van het koellichaam op dezelfde hoogte als de pinnen in de achterplaat.

Plaats het koellichaam recht omlaag op de CPU, de GPU en de VRAM-chips.

Beweeg het koellichaam niet meer als deze contact maakt met de CPU. De koelpasta bevestigt de CPU aan het koellichaam en het bewegen van het koellichaam kan ertoe leiden dat de pinnen verbuigen.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります