メインコンテンツにスキップ

Retrait de l'écran

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
フランス語

手順 17を翻訳中

手順17
Screen Removal, Disconnect the battery: 手順 0、 2の画像 1 Screen Removal, Disconnect the battery: 手順 0、 2の画像 2
Disconnect the battery
  • Use the pointed end a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board.

  • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

  • Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

Utilisez l'extrémité pointue d'une spatule (spudger) ou un ongle propre pour soulever le connecteur de la batterie de sa prise sur la carte mère.

Essayez de ne pas endommager les joints de silicone noir qui entourent cette connexion et d'autres connexions de la carte. Ces joints offrent une protection supplémentaire contre les intrusions d'eau et de poussière.

Repliez légèrement le connecteur pour l'éloigner de la carte mère, afin d'éviter qu'il n'entre accidentellement en contact avec la prise et qu'il n'alimente le téléphone pendant votre réparation iPhone 13 Pro.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります