メインコンテンツにスキップ

Remplacement de l'écran de l'iMac Intel 27" EMC 2546

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての44個のガイドに反映されます。

英語
フランス語

手順 2を翻訳中

手順2
iMac Intel 27" EMC 2546 Display Replacement: 手順 0、 3の画像 1 iMac Intel 27" EMC 2546 Display Replacement: 手順 0、 3の画像 2 iMac Intel 27" EMC 2546 Display Replacement: 手順 0、 3の画像 3
  • Starting on the left of the display, near the power button, insert the iMac Opening Tool into the gap between the glass panel and the rear case.

  • The hub on the iMac Opening Tool will keep you from pushing the wheel in too far. If using a different tool, insert no more than 3/8" (9.5 mm) into the display. You risk severing antenna cables and causing serious damage.

En partant de la gauche de l'écran, près du bouton de mise sous tension, insérez l'outil d'ouverture de l'iMac dans l'interstice entre la vitre et le boîtier arrière.

Le moyeu de l'outil d'ouverture de l'iMac vous empêchera d'engager la roulette trop loin. Si vous vous servez d'un autre outil, ne l'insérez pas de plus de 9,5 mm dans l'écran. Sinon, vous risquez de sectionner les câbles de l'antenne et de provoquer de graves dégâts.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります