メインコンテンツにスキップ

iPad Pro 12.9 英寸第五代打开程序

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
中国語

手順 17を翻訳中

手順17
iPad Pro 12.9" 5th Gen Opening Procedure, Top edge information: 手順 0、 3の画像 1 iPad Pro 12.9" 5th Gen Opening Procedure, Top edge information: 手順 0、 3の画像 2 iPad Pro 12.9" 5th Gen Opening Procedure, Top edge information: 手順 0、 3の画像 3
Top edge information
  • While the top edge adhesive softens, note the following:

  • There are two ambient light sensors near the corners. Don't insert your pick more than 1 mm here.

  • The front-facing camera and additional sensors are in the center of the top edge. Don't insert your pick here—there is less than 1 mm of adhesive and you may damage the components.

  • For everywhere else, don't insert your pick more than 5 mm to avoid damaging the screen.

当顶部边缘粘合剂软化时,请注意以下事项:

角落附近有两个环境光传感器。 此处插入撬片的深度请勿超过 1 毫米

前置摄像头和附加传感器位于顶部边缘的中心。 请勿将撬片镐插入此处 - 粘合剂厚度不足 1 毫米,可能会损坏组件。

对于其他地方,请勿将撬片插入超过 5 毫米,以免损坏屏幕。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります