iPad Pro 11" 1st Gen Battery Replacement

ガイドに戻る

英語

イタリア語

前の手順次の手順

手順 3を翻訳中

手順3

iPad Pro 11" 1st Gen Battery Replacement, Apply isopropyl alcohol: 手順 0、 3の画像 1

iPad Pro 11" 1st Gen Battery Replacement, Apply isopropyl alcohol: 手順 0、 3の画像 2

iPad Pro 11" 1st Gen Battery Replacement, Apply isopropyl alcohol: 手順 0、 3の画像 3

Apply isopropyl alcohol

If you removed all of the stretch-release adhesive, good job! You can skip the next four steps. If not, then follow the next four steps to apply isopropyl alcohol.
Prop the left side of the iPad up against an object so the isopropyl alcohol can flow under the right battery cell.
Apply high-strength (>90%) isopropyl alcohol along the inside edge of the right battery cell.
Be careful if you're using a syringe with a needle or other sharp instrument to dispense isopropyl alcohol—a punctured or bent battery may leak dangerous chemicals or cause a fire.
Let the alcohol soak for two minutes to soften the adhesive under the battery cell.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。