メインコンテンツにスキップ

Sostituzione frontalino analogici controller DualSense v2

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての15個のガイドに反映されます。

英語
イタリア語

手順 5を翻訳中

手順5
DualSense Controller v2 Middle Trim Replacement, Remove the middle trim: 手順 0、 3の画像 1 DualSense Controller v2 Middle Trim Replacement, Remove the middle trim: 手順 0、 3の画像 2 DualSense Controller v2 Middle Trim Replacement, Remove the middle trim: 手順 0、 3の画像 3
Remove the middle trim
  • Use your fingers to lift up the bottom edge of the middle trim to release the remaining clips.

  • Lift the middle trim over the joysticks to remove it.

  • During reassembly, position the middle trim into place and press along all edges to engage the clips securing it to the controller.

Usa le dita per sollevare il bordo inferiore del frontalino per liberare i ganci restanti.

Solleva il frontalino oltre i joystick per rimuoverlo.

Durante il riassemblaggio, posiziona il frontalino e premi lungo i bordi per agganciarlo al controller.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります