注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。
手順 3を翻訳中
手順3
Pry the battery
-
Apply a suction cup to the battery, as close to the center of the right edge as possible.
-
Insert an opening pick between the right edge of the battery and the frame.
-
Pull on the suction cup and pry the battery upward.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。