メインコンテンツにスキップ

iPhone 14 Pro 이어피스 스피커 교체

英語
韓国語

ガイドの前提条件

この翻訳が完了したとみなされる前に、全ての必須条件ガイドを翻訳する必要があります。

iPhone 14 Pro Pentalobe/펜타로브/별나사 교체

여는 픽을 3mm에 표시하기

iPhone 14 Pro 스크린 사전 작업

ガイド情報

= 完了 = 不完全
    Use this guide to replace a broken earpiece speaker in an iPhone 14 Pro.
    This guide was created using the ***A2890*** (international) model. If you're fixing a different iPhone 14 Pro model, there may be some visual discrepancies, but the procedure should be the same.
    You’ll need replacement adhesive to reattachsafely secure the screen when reassembling your iPhone. Retaining water resistance after the device. Yourrepair will depend on how well you reapply the screen adhesive, but note that your device will function normally, but will most likely lose its official IP ([link|https://www.iec.ch/ip-ratings#:~:text=Electric%20and%20electronic%20equipment%20deteriorate,are%20widely%20used%20throughout%20industry.|Ingress Protection|new_window=true]) rating.

      ガイドの手順

      手順1 — 이어피스 스피커 나사 풀기

      십자 드라이버를 이용해 이어피스 스피커를 고정하고 있는 1.6mm-길이 나사 두 개를 풀어주세요.

      手順2 — 이어피스 스피커 들어올리기

      스퍼저의 뾰족한 끝을 이어피스 스피커의 오른쪽 가장자리 아래로 넣으세요.

      手順3 — 이어피스 스피커 분리하기

      트위저나 손가락을 이용해 이어피스 스피커를 분리하세요.

      クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります