メインコンテンツにスキップ

iPhone 14 Plus Front-Facing Camera/전면 카메라 어셈블리 교체

英語
韓国語

ガイドの前提条件

この翻訳が完了したとみなされる前に、全ての必須条件ガイドを翻訳する必要があります。

iPhone 14 Plus Pentalobe/펜타로브/별나사 교체

여는 픽을 3mm에 표시하기

iPhone 14 Plus 후면 유리 교체

ガイド情報

= 完了 = 不完全
    Use this guide to remove or replace the front-facing camera assembly in an iPhone 14 Plus.
    This guide was created using the ***A2886*** (international) model. If you're fixing a different iPhone 14 Plus model, there may be some visual discrepancies, but the procedure should be the same.
    You’ll need replacement adhesive to reattach the screen when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating.

    This assembly includes the front-facing camera and Face ID hardware. These parts come as one unit, and the sensors are [link|https://www.ifixit.com/News/66879/iphone-14-parts-pairing-results-apple-is-still-trying-to-monopolise-repair|uniquely paired to your logic board|new_window=true]. ***Note:*** If you replace this part, ***Face ID will no longer work***. This repair will restore a broken selfie cam to working order, but on iOS 17.6 and earlier, only Apple or an Apple “authorized” technician can restore Face ID. On iOS 18 and newer, you can recalibrate new, genuine front-facing cameras using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
      If possible, turn on your device and test your repair before installing new adhesive and resealing.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      ***To reassemble your device, follow these instructions in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/iPhone+14+Plus|Answers community] for help.

      ガイドの手順

      手順1 — 전면 카메라 브래킷 풀기

      Y000 드라이버를 사용하여 전면 카메라 어셈블리 케이블 브래킷을 고정하는 1.2mm-길이 나사 두 개를 풀어주세요.

      手順2 — 전면 카메라 어셈블리 케이블 브래킷 분리하기

      핀셋이나 손가락을 사용하여 전면 카메라 어셈블리 케이블 브래킷을 분리하세요.

      手順3 — 카메라와 센서 케이블 분리하기

      Spudger/스퍼저를 사용하여 커넥터들을 소켓에서 똑바로 들어 올려서 카메라와 센서 케이블을 분리하세요.

      手順4 — 전면 카메라 어셈블리 분리하기

      핀셋 또는 손가락을 사용하여 전면 카메라 어셈블리를 분리하세요.

      クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります