メインコンテンツにスキップ

iPhone 14 Plus フロントカメラアセンブリの交換

英語
日本語

ガイドの前提条件

この翻訳が完了したとみなされる前に、全ての必須条件ガイドを翻訳する必要があります。

iPhone 14 Plus ペンタローブネジの交換

オープニング・ピックに3mmの印をつける

iPhone 14 Plus リアガラスの交換

ガイド情報

= 完了 = 不完全
    Use this guide to remove or replace the front-facing camera assembly in an iPhone 14 Plus.
    This guide was created using the ***A2886*** (international) model. If you're fixing a different iPhone 14 Plus model, there may be some visual discrepancies, but the procedure should be the same.
    You’ll need replacement adhesive to reattach the screen when reassembling the device. Your device will most likely lose its IP (Ingress Protection) rating.
    This assembly includes the front-facing camera and Face ID hardware. These parts come as one unit, and the sensors are [link|https://www.ifixit.com/News/66879/iphone-14-parts-pairing-results-apple-is-still-trying-to-monopolise-repair|uniquely paired to your logic board|new_window=true]. ***Replacing the front camera assembly meansNote:*** If you'll lose replace this part, ***Face ID functionality andwill no longer work***. This repair will restore a broken selfie cam to working order, as ofbut on iOS 17.06 and earlier, may still experience issuesonly Apple or an Apple “authorized” technician can restore Face ID. On iOS 18 and newer, you can recalibrate new, genuine front-facing cameras using your front camera***Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
      If possible, turn on your device and test your repair before installing new adhesive and resealing.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      ***To reassemble your device, follow these instructions in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/iPhone+14+Plus|Answers community] for help.

      ガイドの手順

      手順1 — フロントカメラブラケットのネジを外す

      Y000ドライバーを使って、フロントカメラアセンブリのケーブルブラケットを固定している、長さ1.2 mmネジを2本外します。

      手順2 — フロントカメラアセンブリのケーブルブラケットを外す

      ピンセットもしくは指先で、フロントカメラアセンブリのケーブルブラケットを外します。

      手順3 — カメラとセンサーケーブルを外す

      スパッジャーを使って、カメラとセンサーケーブルのコネクタをソケットからまっすぐ持ち上げて、接続を外します。

      手順4 — フロントカメラアセンブリを外す

      ピンセットもしくは指で、フロントカメラアセンブリを外します。

      クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります