メインコンテンツにスキップ

iPhone 14 Plus 后壳替换

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
中国語

手順 14を翻訳中

手順14
iPhone 14 Plus Rear Glass Replacement: 手順 0、 3の画像 1 iPhone 14 Plus Rear Glass Replacement: 手順 0、 3の画像 2 iPhone 14 Plus Rear Glass Replacement: 手順 0、 3の画像 3
  • Insert your pick underneath the top-left edge of the phone. Slide it around the top-left corner and halfway across the top edge.

  • Don't insert the pick more than 3 mm, as you may damage or smear the camera array.

  • Don't try to fully separate the rear glass yet, as there's a fragile ribbon cable connecting it to the iPhone's logic board.

将撬片插入手机左上角下方。 将其滑过左上角并滑过顶部边缘的一半。

撬片插入的深度不要超过3毫米,否则可能会损坏相机阵列。

此时请不要试图完全分离后壳,因为此时仍然有易损的排线将后壳与主板连接。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります