メインコンテンツにスキップ

Reemplazo del cristal trasero iPhone 14 Plus

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
スペイン語

手順 14を翻訳中

手順14
iPhone 14 Plus Rear Glass Replacement: 手順 0、 3の画像 1 iPhone 14 Plus Rear Glass Replacement: 手順 0、 3の画像 2 iPhone 14 Plus Rear Glass Replacement: 手順 0、 3の画像 3
  • Insert your pick underneath the top-left edge of the phone. Slide it around the top-left corner and halfway across the top edge.

  • Don't insert the pick more than 3 mm, as you may damage or smear the camera array.

  • Don't try to fully separate the rear glass yet, as there's a fragile ribbon cable connecting it to the iPhone's logic board.

Coloca tu púa debajo del borde superior izquierdo del teléfono. Deslízala alrededor de la esquina superior izquierda y hasta la mitad del borde superior.

No insertes la púa más de 3 mm, ya que puedes dañar o manchar el conjunto de cámaras.

No intentes separar por completo el vidrio trasero todavía, ya que un cable plano frágil aún lo conecta a la placa lógica del iPhone.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります