メインコンテンツにスキップ

開口方法(第3世代モデル)

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
日本語

手順 19を翻訳中

手順19
Opening Procedure (3rd Gen), Separate the left edge adhesive: 手順 0、 2の画像 1 Opening Procedure (3rd Gen), Separate the left edge adhesive: 手順 0、 2の画像 2
Separate the left edge adhesive
  • Insert an opening pick at a 45˚ angle just above the bottom left corner.

  • Don't insert the pick more than 5 mm or you'll damage the display cables.

  • Carefully slide the pick along the left edge, stopping when you reach the flat section of the frame.

左下コーナーの上を45度の角度でオープニングピックを差し込んでください。

ディスプレイケーブルが破損することがあるため、5mm以上オープニングピックを差し込まないでください。

オープニングピックを左端に沿って慎重に滑らせ、フレームの平らな部分に到達したら止めます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります