注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。
手順 1を翻訳中
手順1
Remove the front camera
-
Use a spudger to pry up and disconnect the front camera's press connector located on the bottom of the logic board.
-
Remove the front camera.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。