メインコンテンツにスキップ

スクリーンの外し方

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 7を翻訳中

手順7
Screen Removal, Reposition the opening pick: 手順 0、 3の画像 1 Screen Removal, Reposition the opening pick: 手順 0、 3の画像 2 Screen Removal, Reposition the opening pick: 手順 0、 3の画像 3
Reposition the opening pick
  • While still applying suction, pivot the pick upwards to a steep angle.

  • Carefully push the pick in while prying to reposition the opening pick into the bezel seam.

  • Only insert the pick up to 3.5 mm to avoid damaging the internals.

吸盤カップを装着させたまま、ピックを上に向けて引き上げます。

ピックをこじ開けがら慎重に押し込み、ピックをベゼルの継ぎ目に再度差し込みます。

内部を傷つけないように、ピックは3.5mm以上差し込まないようにしてください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります