Opening Procedure

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての73個のガイドに反映されます。

英語

オランダ語

手順 6を翻訳中

手順6

Insert an opening pick

If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.
Once the screen is warm to touch, apply a suction handle to the left edge of the screen and as close to the edge as possible.
Lift the screen with the suction handle to create a small gap between the digitizer and the frame.
Insert an opening pick into the gap between the digitizer and the frame.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。