LED Glyph Assembly

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語

日本語

手順 5を翻訳中

手順5

Remove the bottom LED glyph assembly

Be very careful when working on the bottom LED assembly. There's a cable running underneath its whole surface that can be damaged easily.
The bottom LED assembly is held in place by small pieces of adhesive.
Slide an opening pick underneath the right, bottom and left edge of the bottom LED assembly to carefully separate it from the daughterboard cover.
Do not slide the opening pick deeper than shown in the photos. Otherwise you risk damaging the LED cable.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。