メインコンテンツにスキップ

iPad Pro 11インチ 第二世代 ロジックボードの交換

注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。

英語
日本語

手順 5を翻訳中

手順5
iPad Pro 11" 3rd Gen Logic Board Replacement, Disconnect the top right sensor cable: 手順 0、 2の画像 1 iPad Pro 11" 3rd Gen Logic Board Replacement, Disconnect the top right sensor cable: 手順 0、 2の画像 2
Disconnect the top right sensor cable
  • Use the pointed end of a spudger to disconnect the top right sensor cable.

スパッジャーの鋭利な先端を使って、右上センサーケーブルの接続を外します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります