メインコンテンツにスキップ

iPad Pro 11インチ 第3世代 バッテリーの交換

英語
日本語

手順 3を翻訳中

手順3
iPad Pro 11" 3rd Gen Battery Replacement, Apply isopropyl alcohol: 手順 0、 3の画像 1 iPad Pro 11" 3rd Gen Battery Replacement, Apply isopropyl alcohol: 手順 0、 3の画像 2 iPad Pro 11" 3rd Gen Battery Replacement, Apply isopropyl alcohol: 手順 0、 3の画像 3
Apply isopropyl alcohol
  • If you removed all of the stretch-release adhesive, good job! You can skip the next four steps. If not, then follow the next four steps to apply isopropyl alcohol.

  • Prop the left side of the iPad up against an object so the isopropyl alcohol can flow under the right battery cell.

  • Apply high-strength (>90%) isopropyl alcohol along the inside edge of the right battery cell.

  • Be careful if you're using a syringe with a needle or other sharp instrument to dispense isopropyl alcohol—a punctured or bent battery may leak dangerous chemicals or cause a fire.

  • Let the alcohol soak for two minutes to soften the adhesive under the battery cell.

無事全ての粘着タブを外せたなら、おめでとうございます!その場合は次の4手順を飛ばして下さい。そうでない場合は、ここからの4手順にしたがってイソプロピルアルコールを使って下さい。

iPadの左側の下に何かの支えを入れて、イソプロピルアルコールが右側バッテリーセルの下を流れるようにして下さい。

右側バッテリーセルの内側の端に沿って高濃度(90%以上)のイソプロピルアルコールをたらして下さい。

イソプロピルアルコールをたらすのに針のついた注射器などの先端が尖った道具を使う場合は十分にご注意ください。バッテリーに穴を開けたり変形させた場合、危険な物質が漏れたり炎上する危険があります

バッテリーセルの下の接着を柔らかくするために、2分ほどアルコールを染み込ませます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります