メインコンテンツにスキップ

iPad Pro 11インチ 第3世代 リアカメラの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 10を翻訳中

手順10
iPad Pro 11" 3rd Gen Rear Camera Replacement, Remove the rear camera shield: 手順 0、 3の画像 1 iPad Pro 11" 3rd Gen Rear Camera Replacement, Remove the rear camera shield: 手順 0、 3の画像 2 iPad Pro 11" 3rd Gen Rear Camera Replacement, Remove the rear camera shield: 手順 0、 3の画像 3
Remove the rear camera shield
  • Use tweezers or your fingers to lift the right side of the camera shield up.

  • Slide the shield out horizontally.

  • During reassembly, lower the left side of the shield back into place and make sure the small protruding tab is slotted in, then hinge the shield closed.

ピンセットもしくは指を使って、カメラシールド右側を持ち上げます。

シールドを水平にスライドします。

再組み立ての際は、 シールドの左側を元の位置に下げ、小さな突起タブがはめ込まれていることを確認し、シールドをヒンジで閉じます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります