メインコンテンツにスキップ

iPad Pro 11" 3rd Gen Logic Board Replacement

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
フランス語

手順 23を翻訳中

手順23
iPad Pro 11" 3rd Gen Logic Board Replacement, Pry up the bottom: 手順 0、 3の画像 1 iPad Pro 11" 3rd Gen Logic Board Replacement, Pry up the bottom: 手順 0、 3の画像 2 iPad Pro 11" 3rd Gen Logic Board Replacement, Pry up the bottom: 手順 0、 3の画像 3
Pry up the bottom
  • Insert the flat end of a spudger under the lower edge of the logic board.

  • Don't pry against the bottom interconnect board as this will damage it.

  • Slowly lift up the bottom of the logic board.

  • If the adhesive is still too strong to lift up the logic board, apply some additional isopropyl alcohol and wait one minute.

  • Lift up the logic board and replace the playing card battery blocker with an opening pick.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります