メインコンテンツにスキップ

上部ケーブルシールドの外し方

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
日本語

手順 2を翻訳中

手順2
Top Cable Shield Removal, Heat the top cable shield: 手順 0、 2の画像 1 Top Cable Shield Removal, Heat the top cable shield: 手順 0、 2の画像 2
Heat the top cable shield
  • Apply a heated iOpener to the top cable shield for one minute to soften the adhesive securing it to the logic board.

加熱したiOpenerを上部ケーブルシールドに1分間当て、ロジックボードに固定している接着剤を柔らかくします。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります