メインコンテンツにスキップ

iPhone X 電源とオーディオ外付けボタンの交換

注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。

英語
日本語

手順 3を翻訳中

手順3
iPhone X Power and Audio Exterior Buttons Replacement: 手順 0、 3の画像 1 iPhone X Power and Audio Exterior Buttons Replacement: 手順 0、 3の画像 2 iPhone X Power and Audio Exterior Buttons Replacement: 手順 0、 3の画像 3
  • Grasp one end of the spring clip with a pair of tweezers.

  • Firmly pull on the end of the clip until it is free of the button.

  • Swing the clip out slightly from the button.

  • Slide the clip back the opposite direction to free the other end.

  • Remove the spring clip.

  • Repeat for the volume up and down buttons.

ピンセットでネジクリップの先端の一つを摘みます。

ボタンが外れるまで、クリップの先端をしっかりと引っ張ります。

ボタンからクリップをわずかに振り出します。

クリップを反対方向にスライドして戻し、もう一方の端を外します。

ネジクリップを外します。

音量アップ/ダウンボタンにも同じ作業を繰り返します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります