メインコンテンツにスキップ

iPhone X 電源とオーディオ外付けボタンの交換

注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。

英語
日本語

手順 5を翻訳中

手順5
iPhone X Power and Audio Exterior Buttons Replacement, Remove the Volume and Power Buttons: 手順 0、 3の画像 1 iPhone X Power and Audio Exterior Buttons Replacement, Remove the Volume and Power Buttons: 手順 0、 3の画像 2 iPhone X Power and Audio Exterior Buttons Replacement, Remove the Volume and Power Buttons: 手順 0、 3の画像 3
Remove the Volume and Power Buttons
  • If you can't get hold of the button from the outside of the case, push the pins out from the inside.

  • Remove the button.

  • Repeat for the remaining buttons.

  • Before attempting to reassemble the buttons, go watch the video again. If you thought it was a pain to take them apart, wait until you try to put them back together. Be patient and work carefully and they'll eventually fit.

ケースの外側からボタンがつかめない場合は、内側からピンを押し出します。

ボタンを外します。

残りのボタンにも同じ作業を繰り返します。

ボタンを組み立てる前に、もう一度ビデオを見てください。分解するのが面倒だと思った方は、組み立ててみてからにしてください。根気よく、丁寧に作業すれば、いずれはパーツが組み合わさっていくようになります。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります