メインコンテンツにスキップ

iPhone X 下部スピーカーの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 8を翻訳中

手順8
iPhone X Lower Speaker Replacement: 手順 0、 2の画像 1 iPhone X Lower Speaker Replacement: 手順 0、 2の画像 2
  • When prying up the speaker, take care not to damage the flex cable you just disconnected. If necessary, hold it to one side so the speaker has room to come out.

  • Insert a spudger under the top edge of the speaker near the edge of the iPhone's case.

  • Gently pry up and lift the top edge of the speaker.

  • When reinstalling the speaker, check the position of the flex cable and make sure it doesn't get trapped underneath the speaker.

スピーカーを取り出す時、接続を外したフレックスケーブルにダメージを与えないようご注意ください。必要であれば、ケーブルの一方の端を持ち、スピーカーが取り出せるスペースを作ってください。

スパッジャーをケース端付近のスピーカーの上部先端の下に差し込みます。

丁寧にスピーカー上部先端からこじ開けて、押し上げます。

スピーカーを再装着する際は、フレックスケーブルの位置を確認してスピーカーの下で詰まらないようご注意ください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります