iPad 7 Battery Replacement

ガイドに戻る

英語

フランス語

前の手順次の手順

手順 4を翻訳中

手順4

iPad 7 Battery Replacement, Open the adhesive remover: 手順 0、 3の画像 1

iPad 7 Battery Replacement, Open the adhesive remover: 手順 0、 3の画像 2

iPad 7 Battery Replacement, Open the adhesive remover: 手順 0、 3の画像 3

Open the adhesive remover

Pull off the black rubber stopper from your bottle of adhesive remover.
Twist to loosen or remove the bottle cap before you cut the applicator tip.
This unseals the bottle and allows the pressure to equalize before you cut the applicator tip. If you skip this step, the adhesive remover may spray out unexpectedly when the tip is cut.
Use scissors to cut off the sealed tip of the applicator.
Cutting close to the narrow tip will give you better control so you can apply the adhesive remover in small amounts.
Twist and close the bottle cap securely before you proceed further.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。