注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。
手順 6を翻訳中
手順6
-
Insert an opening pick between the antenna and speaker assembly.
-
Slide the opening pick underneath the antenna to cut the foam adhesive.
-
Use tweezers, or your fingers, to remove the left antenna.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。