メインコンテンツにスキップ

MacBook Pro 16" 2021 배터리 커넥터 교체

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての12個のガイドに反映されます。

英語
韓国語

手順 1を翻訳中

手順1
MacBook Pro 16" 2021 Battery Connector Replacement, Disconnect the battery board: 手順 0、 3の画像 1 MacBook Pro 16" 2021 Battery Connector Replacement, Disconnect the battery board: 手順 0、 3の画像 2 MacBook Pro 16" 2021 Battery Connector Replacement, Disconnect the battery board: 手順 0、 3の画像 3
Disconnect the battery board
  • Peel back any tape covering the battery board data cable connector on the logic board.

T3 Torx/톡스 드라이버를 사용하여 트랙패드 케이블 브래킷을 로직 보드에 고정하는 2.1mm-길이 나사 두 개를 풀어주세요.

-[title] Unfasten the trackpad cable bracket
-[* red] Use a T3 Torx driver to remove the two 2.1 mm-long screws securing the trackpad cable bracket to the logic board.
+[title] Disconnect the battery board
+[* red] Peel back any tape covering the battery board data cable connector on the logic board.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります