メインコンテンツにスキップ

iPhone SE 2022 Vervanging van de thuisknop/Touch ID-sensor

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
オランダ語

手順 3を翻訳中

手順3
iPhone SE 2022 Home/Touch ID Sensor Replacement, Disconnect the home/Touch ID sensor: 手順 0、 3の画像 1 iPhone SE 2022 Home/Touch ID Sensor Replacement, Disconnect the home/Touch ID sensor: 手順 0、 3の画像 2 iPhone SE 2022 Home/Touch ID Sensor Replacement, Disconnect the home/Touch ID sensor: 手順 0、 3の画像 3
Disconnect the home/Touch ID sensor
  • Use an opening tool to pry under the left edge of the home/Touch ID sensor cable connector to disconnect it from its socket.

  • If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat end of a spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.

Gebruik een openingstool om de thuisknop los te koppelen: wrik de aansluiting vanaf de linkerzijde van de kabel uit het contact omhoog.

Als het volledige contact omhoog komt zetten, druk je de kabel bij de bovenkant van de aansluiting naar beneden met het platte einde van een spudger, terwijl je tegelijkertijd de aansluiting uit het contact probeert te wrikken. Wees wel voorzichtig en voorkom schade, aangezien dat kan leiden tot een dysfunctionele sensor.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります