修理を始めるには コミュニティ ストア

Steam Deck Vervanging van de ventilator

英語
オランダ語

ガイドの前提条件

この翻訳が完了したとみなされる前に、全ての必須条件ガイドを翻訳する必要があります。

Steam Deck Vervanging van de achterste behuizing

Steam Deck Loskoppelen van de batterij

Steam Deck Verwijderen van de sticker op het koellichaam

ガイド情報

= 完了 = 不完全
    Use this guide to replace the cooling fan in your Steam Deck LCD, or remove it for cleaning.
    Before you begin, completely ***power down and unplug all cables*** from your Steam Deck. Remember to follow general electrostatic discharge (ESD) safety procedures while repairing the device.
    Remember: follow general [link|https://www.ifixit.com/News/4883/esd-is-not-a-venereal-disease|electrostatic discharge (ESD) safety procedures] while repairing your device.
    ***Note:*** Valve started shipping Steam Decks with refreshed internal designs in early 2023. Your Steam Deck may look different than the one depicted in the photos, but the procedure is the same. ***The Steam Deck's fan design differs between versions.*** Before ordering a replacement fan, [guide|148893|remove the back cover|new_window=true] of your Steam Deck to check what version you have. An original Steam Deck will have a metallic motherboard shield and a fan with square sides, as [link|https://guide-images.cdn.ifixit.com/igi/dLHFOKZhRCiknI3w.full|seen here]. A refreshed Steam Deck will have a black motherboard shield and a fan with curved sides, as [link|https://guide-images.cdn.ifixit.com/igi/l2ABGc6CMQFIytZB.full|seen here].

      ガイドの手順

      手順1 — Koppel de ventilator los

      Gebruik een pincet om de randen van de ventilatoraansluiting vast te pakken en trek deze omhoog om deze los te koppelen van het moederbord.

      手順2 — Verwijder de schroeven uit de ventilator

      Gebruik een kruiskopschroevendraaier om de twee 3,7 mm lange schroeven, waarmee de ventilator is bevestigd, te verwijderen.

      手順3 — Verwijder de ventilator

      Verwijder de ventilator.

      クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。