メインコンテンツにスキップ

Steam Deck ヒートシンクステッカーの取り外し

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
日本語

手順 1を翻訳中

手順1
Steam Deck Heatsink Sticker Removal, Remove the heatsink sticker: 手順 0、 3の画像 1 Steam Deck Heatsink Sticker Removal, Remove the heatsink sticker: 手順 0、 3の画像 2 Steam Deck Heatsink Sticker Removal, Remove the heatsink sticker: 手順 0、 3の画像 3
Remove the heatsink sticker
  • Use a pair of tweezers to remove the sticker from the top edge of the fan.

  • If possible, try not to rip or tear this sticker so it can be reused. Use a little bit of heat if necessary to soften the adhesive.

  • If the sticker feels like it might tear, use tweezers to peel up one edge just until you can grip it with your fingers, then remove the rest by hand.

ピンセットを使って、ファンの上部端からステッカーを剥がします。

可能であれば、再利用できるようにするため、このステッカーを切断したり、裂いたりしないようご注意ください。必要に応じて少し温めて、接着剤を柔らかくして作業して下さい。

ステッカーが破れそうな時は、ピンセットで片方の端を指でつかめる程度まで剥がし、残りは手で作業を続けます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります