メインコンテンツにスキップ

Removing the HP Elitebook 6930p Display Assembly

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
日本語

手順 3を翻訳中

手順3
Removing the HP Elitebook 6930p Display Assembly: 手順 0、 3の画像 1 Removing the HP Elitebook 6930p Display Assembly: 手順 0、 3の画像 2 Removing the HP Elitebook 6930p Display Assembly: 手順 0、 3の画像 3
  • Turn the computer right-side up with the front toward you and open the computer lid past 90 degrees.

  • Locate and disconnect the display panel cable.

  • Locate and disconnect the microphone cable.

  • Locate and disconnect the webcam cable.

  • Locate and disconnect the 3 antenna cables.

  • Unclip the antenna cables from the retaining clips.

  • NOTE There are 2 antenna cables that go from the display assembly through the hole shown and connect to the WWAN (3G) WiFi card if it is installed. In my case they were just threaded into the hole to make things tidy as I didn't have a WWAN card.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります