注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。
手順 1を翻訳中
手順1
-
Place the computer so that the back panel is facing up. Begin by removing the two visible Torx T5 9 mm screws near the hinges.
-
Next, remove the four visible Torx T5 3 mm on the sides.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。