メインコンテンツにスキップ

iPhone 13 リアカメラの交換

英語
日本語

手順 5を翻訳中

手順5
iPhone 13 Rear-Facing Camera Replacement, Remove the rear-facing cameras: 手順 0、 3の画像 1 iPhone 13 Rear-Facing Camera Replacement, Remove the rear-facing cameras: 手順 0、 3の画像 2 iPhone 13 Rear-Facing Camera Replacement, Remove the rear-facing cameras: 手順 0、 3の画像 3
Remove the rear-facing cameras
  • Insert the tip of a spudger under the bottom left cable attached to the camera assembly and lift up slightly to dislodge the rear-facing camera assembly.

  • Use the tip of a spudger to lift the top edge of the camera assembly enough so that you can grab it with your fingers.

スパッジャーの先端をカメラアセンブリに繋がっている左下ケーブルの下に差し込みます。それからわずかに持ち上げながら、リアカメラアセンブリの位置をずらします。

スパッジャーの先端を使って、指でつまめる程度の高さまで、カメラアセンブリの上部端を持ち上げます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります