メインコンテンツにスキップ

iPhone 13 mini 여는 절차

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
韓国語

手順 16を翻訳中

手順16
iPhone 13 mini Opening Procedure, Open the iPhone mini: 手順 0、 2の画像 1 iPhone 13 mini Opening Procedure, Open the iPhone mini: 手順 0、 2の画像 2
Open the iPhone mini
  • Rotate your iPhone so the right edge faces you.

  • Open the iPhone by swinging the display up from the right side, like the front cover of a book.

  • Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.

  • Lean the display against something to keep it propped up while you're working on the phone.

  • During reassembly, lay the display in position, align the clips along the top edge, and carefully press the top edge into place before snapping the rest of the display down. If it doesn't click easily into place, check the condition of the clips around the perimeter of the display and make sure they aren't bent.

오른쪽 가장자리가 자신을 향하도록 iPhone을 돌리세요.

책의 뒷 표지처럼 디스플레이 왼편을 위로 펼쳐서 iPhone을 열어주세요.

아직 디스플레이를 완전히 분리하지 마세요. 여전히 약한 리본 케이블 여럿이 iPhone 로직 보드에 연결되어 있습니다.

휴대폰에 작업하는 동안 디스플레이를 다른 물건에 기대어 세워 놓으세요.

재조립할 때 디스플레이를 제자리에 놓고 상단 가장자리를 따라 클립을 정렬한 다음 상단 가장자리를 조심스럽게 눌러서 제자리에 고정하세요. 제대로 들어맞지 않으면 디스플레이 주변의 클립 상태를 점검하고 구부러지지 않았는지 확인해 주세요.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります