メインコンテンツにスキップ

iPhone 13 Proの分解

英語
日本語

手順 9を翻訳中

手順9
iPhone 13 Pro Teardown: 手順 0、 3の画像 1 iPhone 13 Pro Teardown: 手順 0、 3の画像 2 iPhone 13 Pro Teardown: 手順 0、 3の画像 3
  • Up top we find the relocated earpiece speaker, complete with a cute little snoot. That snoot lives between the front-facing camera and Face ID hardware, and connects to a channel that directs sound out the top of the display.

  • While we love simple spring contacts, one of this speaker's standoff screws is trapped under the logic board, meaning you'll have to remove the board to swap the speaker! These layers are quite the repair ogre …

  • With its cables running underneath said earpiece speaker (which, again, is underneath the logic board) the front-facing camera hardware—enabler of the new, shrunken Notch™—is not exactly a piece of cake to access. But, at last, we have arrived!

  • After pulling out all the big-name bits, we spy something with its very own cut-out in the case metal. Our guess is that it's an Ultra Wideband antenna. Say hi, Find My!

デバイス上部には、再配置されたイヤホンスピーカーが確認でき、可愛らしい小鼻が付いています。このスヌートは、フロントカメラとFace IDハードウェアの間に搭載されていて、ディスプレイ上部からサウンドを出すチャンネルに繋がっています。

シンプルなスプリングコンタクトの使用は良いのですが、スピーカーに付けられたスタンドオフネジのうち1本がロジックボード下に挟まっています。スピーカーを交換する場合、ロジックボードを外さなければなりません。この周辺のレイヤーは修理にとってかなりの鬼門です...。

スピーカーのケーブルもイヤピーススピーカーもロジックボードの下を通っているため、せっかく新Notch™が縮小していてもフロントカメラハードウェアへのアクセスは容易くありません。しかし、やっとのことで到達できました!

メインパーツをすべて取り出した後、ケースのメタル部分に切り欠きが入ったパーツを発見しました。これは超広帯域アンテナではないかと推測します。こんにちは、Find My!

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります