Microsoft Surface Pro 6 Motherboard Replacement

英語

日本語

手順 3を翻訳中

手順3

Disconnect the digitizer cable

Insert one point of a pair of pointed tweezers into a gap in the edge of the EMI shield covering the digitizer connector.
Use the tweezers to pry the EMI shield away from the display as much as you can without bending it.
Repeat this procedure at different points around the shield until it is free. Remove the shield.
Try not to deform the shield too much—you will need to reinstall it during reassembly.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。